Memory Module - HP Envy x360 m6 Series Maintenance And Service Manual

Memory module

Description
8-TB (2133, 1.2-V, DDR4)
4-TB (2133, 1.2-V, DDR4)
2-TB (2133, 1.2-V, DDR4)
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the memory module:
1. Remove the memory module shield that covers the memory module slots.
The memory module shield is available using spare part number 856815-001.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
Bottom cover on page 27).
Spare part number
820570-005
820569-005
851379-005
Battery on page 29).
Component replacement procedures 35