HP Envy x360 m6 Series Maintenance And Service Manual page 59

e. Detach the G-sensor board (3) from the display back cover. The G-sensor board is secured to
the display back cover with double-sided adhesive.)
f. Remove the G-sensor board.
The G-sensor board is available using spare part number 856809-001.
8. If it is necessary to replace the webcam/microphone module:
a. Remove the display panel assembly.
b. Detach the webcam/microphone module (1) from the display back cover. The webcam/microphone
module is secured to the display back cover with double-sided adhesive.)
c. Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
Component replacement procedures 51