Lenovo HX3510-G Installation And Service Manual page 229

Figure 180. Installation tool
Microprocessor
Figure 181. Installation tool removal
Attention:
• Do not press the microprocessor into the socket.
• Make sure that the microprocessor is oriented and aligned correctly in the socket before
you try to close the microprocessor retainer.
• Do not touch the thermal material on the bottom of the heat sink or on top of the
microprocessor. Touching the thermal material will contaminate it.
Step 9. Remove the cover from the retainer bracket, if one is present. Store the cover in a safe place.
.
Chapter 5 Removing, and replacing components
217