Lenovo HX3510-G Installation And Service Manual page 209

2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if
necessary.
3. Remove the top cover (see "Removing the top cover" on page 116).
4. Remove the fan cage assembly "Removing the fan cage assembly" on page 135).
5. 1 Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.
retention bracket to remove it from the server.
1
2
Figure 147. Retention bracket removal
6. Carefully insert the LCD system information display panel into place.
Figure 148. LCD system information display panel installation
7. Hinge the retention bracket into the slot on the LCD panel assembly and rotate it until it clicks into place.
Retention bracket
Figure 149. Retention bracket installation
8. Connect the cable to the rear of the LCD system information display panel.
9. Slide the LCD panel assembly into the server until it clicks into place.
Retention bracket
LCD system information
display panel
.
Chapter 5 Removing, and replacing components
2 Rotate the
197