Lenovo HX3510-G Installation And Service Manual page 227

Step 6. Rotate the heat sink retention module release lever to the open position.
Heat sink
release lever
Figure 176. Heat-sink lever rotation
Step 7. Open the microprocessor socket release levers and retainer:
3
2
Figure 177. Microprocessor socket levers and retainer disengagement
a. Identify which release lever is labeled as the first release lever to open and open it.
b. Open the second release lever on the microprocessor socket.
c. Open the microprocessor retainer.
Attention: Do not touch the connectors on the microprocessor and the microprocessor socket.
Step 8. Install the microprocessor on the microprocessor socket:
a. Touch the static-protective package that contains the new microprocessor to any unpainted
on the chassis or any unpainted metal surface on any other grounded rack component; then,
carefully remove the microprocessor from the package.
Lock tab
Retainer bracket
Microprocessor
release levers
1
.
Chapter 5 Removing, and replacing components
215