Installing Memory Modules - Dell poweredge T430 Owner's Manual

Figure 54. Removing the memory module
1. memory module
3. memory module socket ejector (2)
Next steps
1. Install the memory module.
NOTE: If you are removing the memory module permanently, install a memory module blank.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system

Installing memory modules

Removing the cooling shroud
Installing the cooling shroud
After working inside your system
Installing memory modules
Prerequisites
WARNING: The memory modules are hot to touch for some time after the system has been
powered down. Allow the memory modules to cool before handling them. Handle the memory
modules by the card edges and avoid touching the components or metallic contacts on the
memory module.
2. memory module socket
137