System Memory - Dell poweredge T430 Owner's Manual
Hide thumbs
Also See for poweredge T430:
- Owner's manual (179 pages) ,
- Getting started (2 pages) ,
- Owner's manual (194 pages)
Table of Contents
Advertisement
Steps
1.
Locate the hard drive slots numbered from four to seven.
2.
Insert the four-slot hard drive blank into the hard drive slot, and push it until the release tabs click
into place.
Figure 52. Installing the four-slot hard drive blank
1.
four-slot hard drive blank
Next steps
1.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing a four-slot hard drive blank
Installing the hard drive backplane
Installing the cooling shroud
After working inside your system
System memory
Your system supports DDR4 registered DIMMs (RDIMMs). It supports DDR4 voltage specifications.
NOTE: MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2400 MT/s, 2133 MT/s, or 1866 MT/s depending on:
•
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration
Optimized)
2.
release tab (4)
127
Advertisement
Table of Contents
Troubleshooting
