Lexmark XM1140 User Manual page 176

Understanding the printer menus
Use
Job Waiting
On
Off
Print Area
Normal
Whole Page
Download Target
RAM
Flash
Disk
Resource Save
On
Off
To
Specify that print jobs be removed from the print queue if they
require unavailable printer options or custom settings.
Print jobs removed from the print queue are stored in a
separate print queue, so other jobs print normally. When the
missing information or options are obtained, the stored jobs
print.
Notes:
•
Off is the factory default setting.
•
This menu setting appears only when a formatted,
working printer hard disk is installed. This requirement
ensures that stored jobs are not deleted if the printer
loses power.
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the
Normal setting, the printer clips the image at the
boundary.
•
Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting, but the
printer will clip the image at the Normal setting
boundary. This affects only pages printed using a PCL 5e
interpreter. This has no effect on pages printed using the
PCL XL or PostScript interpreter.
Set the storage location for downloads.
Notes:
•
RAM is the factory default setting. Storing downloads in
the RAM is temporary.
•
Storing downloads in flash memory or on a printer hard
disk places them in permanent storage. Downloads
remain in flash memory or on the printer hard disk even
when the printer is turned off.
•
This menu setting appears only when a formatted,
working flash drive or printer hard disk is installed.
Specify how the printer handles temporary downloads, such
as fonts and macros stored in the RAM, when the printer
receives a job that requires more memory than is available.
Notes:
•
Off is the factory default setting. This sets the printer to
retain the downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
•
On retains the downloads during language changes and
printer resets. If the printer runs out of memory, then
Memory Full [38] appears, and downloads are not
deleted.
176