Faxing; Setting Up The Printer To Fax - Lexmark XM1140 User Manual

Faxing

Faxing
Note: The fax function is available only in some printer models.
Automatic document feeder (ADF)
Use the ADF for multiple‑page documents including
two-sided pages.

Setting up the printer to fax

CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this
product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone,
during a lightning storm.
Notes:
•
The following connection methods are applicable only in some countries or regions.
•
During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then touch Continue.
•
The indicator light may blink red if the fax function is enabled but not fully set up.
Warning—Potential Damage: Do not touch the cables or the printer in the area shown while actively sending
or receiving a fax.
Scanner glass
Use the scanner glass for single-page documents, book
pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as magazine
clippings).
87