Bravo Transom Serial Number; Lanyard Stop Switch - Mercury 350 MAG Manual

Section 2 - Getting to Know Your Power Package

Bravo Transom Serial Number

The Bravo transom serial number is stamped in the U‑bolt plate of the Bravo transom assembly.
a
The serial number is also stamped on the gimbal housing. This is used as a permanent reference for authorized MerCruiser
Dealers.

Lanyard Stop Switch

The purpose of a lanyard stop switch is to turn off the engine when the operator moves outside the operator's position (as in
accidental ejection from the operator's position).
c
Accidental ejections, such as falling overboard, are more likely to occur in:
• low‑sided sport boats
• bass boats
• high performance boats
Accidental ejections can also occur from:
• poor operating practices
Page 24
Bravo transom assembly U-bolt plate
a - Transom assembly serial Number
25904
a
b
Gimbal housing with serial
number stamping
a - Transom assembly serial
Number
25905
a
RUN
74608
90-8M0050539
a - Stop switch
b - Lanyard
c - Clips to the operator
MAY 2011
eng