Grandstream Networks GXP2130 Administration Manual page 75

CPE SSL Certificate
CPE SSL Private Key
Maintenance  Security Settings Security
Configuration via
Keypad Menu
Enable STAR key
Keypad Locking
Password to
Lock/Unlock
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
Web Access Mode
HTTP Web Port
HTTPS Web Port
Disable SSH
Web/Keypad/Restrict
mode Lockout
Duration
Maintenance  Security Settings Trusted CA Certificates
Trusted CA Certificates
Maintenance  Packet Capture
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
Configures the access control for the users to configure from keypad Menu.
There are three different options:

Unrestricted: All the options can be accessed in keypad Menu.

Basic settings only: The SIP option under Phone submenu, and
Network, Upgrade, UCM Detect and Factory Reset options under
System submenu will not be available in LCD Menu.

Constraint Mode: The phone will require administration password to
change the Network, Upgrade and Factory Reset options under System
submenu, and SIP option under Phone submenu as well.

Locked Mode: The phone menu and changing MPK/VPK/Line are
disabled.
The default setting is "Unrestricted".
If set to "Yes", the keypad can be locked by pressing and holding the STAR
* key for about 4 seconds. A lock icon will show indicating the keypad is
locked. The default setting is "Yes".
Note: When the keypad is locked, users would need press and hold the
STAR * key for about 4 seconds again and then enter the password to unlock
it.
Configures the password to lock/unlock the keypad.
SSL Certificate used for SIP Transport in TLS/TCP.
SSL Private key used for SIP Transport in TLS/TCP.
SSL Private key password used for SIP Transport in TLS/TCP.
Sets the protocol for web interface. The default setting is "HTTP".
Configures the HTTP port under the HTTP web access mode. Default
setting is "80".
Configures the HTTPS port under the HTTPS web access mode. Default
setting is " 443".
Disables SSH access. The default setting is "No".
Specifies the time in minutes that the web or LCD login interface will be
locked out to user after five login failures. This lockout time is used for web
login, STAR keypad unlock and LCD restrict mode admin login. Range is 0-
60 minutes.
Upload CA Certificate file to phone.
GXP21XX Administration Guide
P a g e | 74