Grandstream Networks GXP2130 Administration Manual page 72

Current Password
New Password
Confirm Password
Maintenance  Upgrade and Provisioning
Upgrade Firmware
Firmware Upgrade and
Provisioning
Always Authenticate
Before Challenge
Allow DHCP Option 43
and Option 66 Override
Server
Additional Override
DHCP Option
Allow DHCP Option
120 to override SIP
Server
3CX Auto Provision
Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Disable SIP NOTIFY
Authentication
Config
Config Upgrade Via
Config Server Path
Config HTTP/HTTPS
The current admin password is required for setting a new admin password.
Set new password for web GUI access as Admin. This field is case sensitive.
Enter the new Admin password again to confirm.
Allow users to upload the firmware file locally by pressing Start, after
selecting the correct firmware file from the local storage, the phone will start
the firmware upgrade automatically.
Specifies how firmware upgrading and provisioning request to be sent:
Always Check for New Firmware, Check New Firmware only when F/W
pre/suffix changes, Always Skip the Firmware Check.
The default setting is "Always Check for New Firmware".
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server. The default setting is "No".
Default setting is "Yes". DHCP option 66 originally was only designed for
TFTP server. Later on it was extended to support an HTTP URL. GXP
phones support both TFTP and HTTP server via option 66. Users can also
use DHCP option 43 vendor specific option to do this. DHCP option 43
approach has priorities.
When enabled, users could select Option 150 or Option 160 to override the
firmware server instead of using the configured firmware server path or the
server from option 43 and option 66 in the local network. Please note this
option will be effective only when option "Allow DHCP Option 43 and Option
66 to Override Server" is enabled. The default setting is "None".
Enables DHCP Option 120 from local server to override the SIP Server on
the phone. The default setting is "No".
Enables automatic provision feature on the phone when 3CX is used as the
SIP server. The default setting is "Yes".
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Device will not challenge NOTIFY with 401 when set to "Yes". Default setting
is "No".
Allows users to choose the config upgrade method: TFTP, HTTP or HTTPS.
The default setting is "HTTPS".
Defines the server path for provisioning.
The user name for the HTTP/HTTPS server.
GXP21XX Administration Guide
P a g e | 71