Grandstream Networks GXP2130 Administration Manual page 53

Disable Transfer
In-call Dial Number on
Pressing Transfer Key
Attended Transfer
Mode
Do Not Escape #
as %23 in SIP URI
Click-To-Dial Feature
Default call log type
Return Code When
Refusing Incoming
Call
Return Code When
Enable DND
Enable BLF Pickup
Screen
Enable BLF Pickup
Sound
BLF Pickup Sound
Except List
BLF Pickup Sound
Only list
Local Call Recording
Feature
Saved Local Call
Recording Location
Download Local Call
Recordings
Instant Message
phonebook will be accepted.

Allow Only Favorites: only incoming calls from favorite numbers in the
local phonebook will be accepted.
Enables / disables transfer feature. If disabled, call transfer will not be
possible. Default setting is "No".
Configures the number to be dialed as DTMF using TRANSFER button.
If set to "Dynamic", attended transfers will be performed by default. The
default setting is "Static".
For more details about "Static" and "Dynamic" transfer, refer to the user
guide.
Specifies whether to replace # by %23 or not for some special situations. The
default setting is "No".
Enables Click-To-Dial feature. If this feature is enabled, user could click the
green dial button on left top corner of phone's Web GUI, then choose the
account and dial to the target number. The default setting is "Disabled".
Sets the default call log list after select MENUCALL HISTORY. Broadsoft
Call Log or Local Call Log option will only show its own list. Default option
will keep both call log lists.
When refusing the incoming call. The phone will send the selected type of
SIP message of the call. Default setting is " Busy 486".
When DND is enabled, the phone will send the selected type of SIP
message. Default setting is " Busy 486".
By enabling BLF Pickup Screen, when monitored BLF is ringing, GXP should
pop up a BLF information window. The default setting is "No".
Gives the user the ability to set sound notification to the monitoring BLF line
when it's ringing, GX21xx should play a sound to inform user. The default
setting is "No".
Configures the list to be playing BLF sound notification for all except
extensions in this list. Separate extensions by comma (,)
Configures play BLF sound notification only for the list below.
Gives the ability to record calls locally while on the call screen. The default
setting is "Disabled".
Location where the recordings will be stored.
When there are recordings presented, you may download them here.
Configures the number of seconds that the message will remain on screen.
GXP21XX Administration Guide
P a g e | 52