Grandstream Networks GXP2130 Administration Manual page 51

Settings  Broadsoft  Broadsoft IM&P
Login Credentials
Broadsoft IM&P
Associated Broadsoft
Account
Auto Login
Display Non XMPP
Contacts
Settings  Call Features
Preferred default
Account
Predictive Dialing
Feature
Off-hook Auto Dial
Off-hook Timeout
features on the phone. If keep the Name box blank, the phone will
use the default name "Missed" for it.

Placed Call Log
Enable/Disable and rename the BroadWorks Xsi Placed Call Log
features on the phone. If keep the Name box blank, the phone will
use the default name "Outgoing" for it.

Received Call Log
Enable/Disable and rename the BroadWorks Xsi Placed Call Log
features on the phone. If keep the Name box blank, the phone will
use the default name "Incoming" for it.

Server
Broadsoft IM&P server address. Usually not necessary to configure
and can already be found in the Broadsoft IM&P username.

Port
Port for the Broadsoft IM&P server. Default port is 5222.

Username
Broadsoft IM&P username, not the Broadsoft account username.

Password
Broadsoft IM&P password, not the Broadsoft account password.
Enables Broadsoft Instant Message and Presence feature. The default
setting is "Disabled".
Specifies the associated account. User could choose each account on the
phone.
Choose to whether or not login to the Broadsoft IM&P account at boot-up.
The default setting is "No".
Choose whether to display non-xmpp contacts associated with the Broadsoft
IM&P user. Non-xmpp contacts will not display a presence or status
message. The default setting is "No".
Allows user to select a default account when other accounts have not been
selected. When chosen an account, this account will be the account that live
DialPad and auto Redial used. However, if this account is not active, then the
first account that is active will be used.
Allow users to show/hide predictive dialing feature, when disabled, users will
not see any predictive numbers while dialing a number.
Configures a User ID/extension to dial automatically when the phone is off
hook. The phone will use the first account to dial out. Default setting is "No".
If configured, when the phone is off hook, it will go on hook after the timeout
(in seconds). The default value is 30 seconds. Valid range is from 10 to 60.
GXP21XX Administration Guide
P a g e | 50