Figure 32: Line Key As Transfer Mode - Grandstream Networks GXP2130 Administration Manual

Intercom
LDAP search
Conference
Multicast Paging
Record
Call Log
Monitored Call Park
Menu
XML Application
Information
Message
The string could be capital or lower case letters, but there must be no "space" in between. For example, in
the cfg.xml, "Transfer" or "transfer" is the same as "18", it will configure Virtual Multi-Purpose Key 3 as
transfer mode.
LCD Indication and Configuration
The configured fixed VPKs are displayed next to the corresponding line. If dynamic VPKs are configured,
the users can see a page number shown on the upper left corner on the LCD. The following figures show
page 1 and page 2 of the VPKs on LCD. Pressing "RIGHT" arrow key or "Next" Softkey will switch to the
next page; pressing "LEFT" arrow key will switch back to the previous page.
Intercom
Ldap Search
Conference
Multicast paging
Record
Call log
Monitoredcp
Menu
Xmlapp
Information
message

Figure 32: Line Key as Transfer Mode

GXP21XX Administration Guide
20
21
22
23
24
25
26
27
28
29
30
P a g e | 107