Grandstream Networks GXP2130 Administration Manual page 38

Enterprise ip phones
Hide thumbs Also See for GXP2130:
Table of Contents

Advertisement

SIP Registration
Unregister On Reboot
Register Expiration
Subscribe Expiration
Reregister Before
Expiration
Enable OPTIONS Keep
Alive
OPTIONS Keep Alive
Interval
OPTIONS Keep Alive
Max Lost
Local SIP Port
SIP Registration
Failure Retry Wait
Time
SIP T1 Timeout
the Request-Line and "TO" header in the SIP request to indicate the E.164
number. If set to "Enable", "Tel:" will be used instead of "SIP:" in the SIP
request. The default setting is "Disable".
Selects whether or not the phone will send SIP Register messages to the
proxy/server. The default setting is "Yes".
Allows the SIP user's registration information to be cleared when the phone
reboots. The SIP REGISTER message will contain "Expires: 0" to unbind the
connection. Three options are available:
If set to "All", the SIP user's registration information will be cleared when
the phone reboots. The SIP Contact header will contain "*" to notify the
server to unbind the connection.
If set to "Instance", the SIP user will be unregistered on current phone
only.
If set to "No", the phone will not unregister the SIP account when
rebooting.
The default setting is "No".
Specifies the frequency (in minutes) in which the phone refreshes its
registration with the specified registrar. The default value is 60 minutes. The
maximum value is 64800 minutes (about 45 days).
Specifies the frequency (in minutes) in which the phone refreshes its
subscription with the specified registrar. The maximum value is 64800 (about
45 days). The default value is 60 minutes.
Specifies the time frequency (in seconds) that the phone sends re-
registration request before the Register Expiration. The default value is 0.
Enable OPTIONS Keep Alive to check SIP Server.
Time interval for OPTIONS Keep Alive feature in Second.
Number of max lost packets for OPTIONS Keep Alive feature before the
phone re-registration.
Defines the local SIP port used to listen and transmit. The default value is
5060 for Account 1, 5062 for Account 2, 5064 for Account 3, 5066 for Account
4, 5068 for Account 5, 5070 for Account 6. The valid range is from 1 to 65535.
Specifies the interval to retry registration if the process is failed. The valid
range is 1 to 3600. The default value is 20 seconds.
SIP T1 Timeout is an estimate of the round trip time of transactions between
a client and server. If no response is received the timeout is increased, and
request re-transmit retries would continue until a maximum amount of time
define by T2. The default setting is 0.5 seconds.
GXP21XX Administration Guide
P a g e
|
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gxp2140Gxp2160Gxp2170Gxp2135

Table of Contents