Mounting The Seat; Removing The Air Filter Box Cover; Installing The Air Filter Box Cover - Husqvarna FC 250 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.21

Mounting the seat

11.22

Removing the air filter box cover

11.23

Installing the air filter box cover

Main work
–
Mount the front of the seat on the collar bushing and the rear in the bracket.
–
Push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
H01402-10
Finishing work
–
Install the air filter box cover. (
–
Pull off the air filter box cover sideways in areas
toward the front.
E00261-10
–
Position air filter box cover on collar bushings
rear.
–
Engage the air filter box cover in areas
E00262-10

.
M6
p. 46)
 ,

and
  
, and
10 Nm (7.4 lbf ft)
 and  , and remove

and push toward the
.
46