Removing The Seat - Husqvarna FC 250 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.20

Removing the seat

–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever to angle lever
Info
Pay attention to flat area
–
Mount and tighten screw
F00089-10
Guideline
Screw, bottom shock
absorber
Info
Raise the wheel slightly to be able to mount the screw more easily.
–
Position the frame protector on the left and right.
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount and tighten screws
Guideline
Screw, frame protector
F00074-11
–
Mount the new cable ties.
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Remove screw
–
Pull seat back and lift it off.
H01401-10

.
 .

.
M10

.

with the washers.
p. 46)

.
M14x1.5 80 Nm (59 lbf ft)
60 Nm Loctite
(44.3 lbf ft)
M5 3 Nm (2.2 lbf ft)
M5 3 Nm (2.2 lbf ft)
p. 64)
p. 35)
45
® 2701™