Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - Husqvarna FC 250 2017 Owner's Manual

6

CONTROLS

6.1

Clutch lever

6.2

Hand brake lever

6.3

Throttle grip

6.4

Kill switch

6.5

Electric starter button

The clutch lever
The clutch is hydraulically operated and self-adjusting.
F00041-10
Hand brake lever
The front brake is engaged using the hand brake lever.
F00039-10
The throttle grip
F00040-10

Kill switch
Possible states
• Kill switch
and the engine can be started.
• Kill switch
ning engine stops, and a non-running engine will not start.
F00042-10
The electric starter button
Possible states
• Electric starter button
• Electric starter button
ated.
F00043-10

is fitted on the left side of the handlebar.

is fitted on the right side of the handlebar.

is fitted on the right side of the handlebar.
is fitted on the left side of the handlebar.
in the basic position – In this position, the ignition circuit is closed
pressed – In this position, the ignition circuit is interrupted, a run-

is fitted on the right side of the handlebar.
in basic position
pressed – In this position, the electric starter is actu-
11