Table of Contents
Advertisement
Front Panel Configuration Port
The mini type B USB port is located on the front panel (see
connects to a host computer for configuration using SIS commands with DataViewer.
To connect the MPS 602 to a host computer:
NOTE: If an Extron USB device has never been connected to the host computer,
prior to connecting the MPS 602 Config (USB) port for the first time, you must install
and activate the USB driver. The simplest way to do this is to install DataViewer (see
DataViewer
www.extron.com.
1.
After the USB driver is loaded, connect a USB A to mini B cable between the Config
port on the MPS 602 front panel and a USB port of the PC.
2.
If this is the first time an Extron product is connected to the PC, the Found New
Hardware Wizard dialog box opens (see figure 47). The first screen offers to connect
to Windows Update to search for the appropriate driver. This is not necessary if the
USB driver is already on your PC (see the NOTE above).
Found New Hardware Wizard
Figure 47.
Select No, not this time (
3.
Click Next (
Found New Hardware Wizard
Figure 48.
4.
Select Install the software automatically (Recommended) (see figure 48,
NOTE: You do not need to insert an installation disk.
on page 57) or obtain the driver from the MPS 602 product page at
Welcome to the Found New
Hardware Wizard
Windows will search for current and updated software by
looking on your computer, on the hardware installation CD, or on
the Windows Update Web site [with your permission].
Read our privacy policy
Can Windows connect to Windows Update to search for
software?
Yes, this time only
Yes, now and every time I connect a device
No, not this time
Click Next to continue
Next >
Found New Hardware Wizard
) if the driver is already on the PC.
1
). The following dialog box opens (see figure 48):
2
figure 48
Welcome to the Found New
Hardware Wizard
This Wizard helps you install software for:
Extron USB Device
If your hardware came with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically [Recommended]
Install from a list or specific location [Advanced]
Click Next to continue
Next >
Install the Software Automatically
MPS 602 • Remote Communication and Control
figure 12
on page 13). It
Cancel
Cancel
).
1
45
Advertisement
Table of Contents
