Program Launcher-Connect-Profile Setup - Panasonic KX-NCP500 Pc Programming Manual

•
To enter the parameters manually, select the PBX Model and confirm that the Modem radio button is
selected.
a.
Specify the settings as required. For more details, see the table below.
b.
Enter the system password for the PBX.
3.
Click Connect.
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Modem Initialize
2.2.7 Program launcher—Connect—Profile Setup
Profiles are useful when one PC is used to connect to multiple PBXs. Rather than manually adjusting the
connection settings each time a different PBX is accessed, it is possible to store the connection settings for
several PBXs. Then, when you wish to connect to a specific PBX, you can simply choose that PBX's profile
from the list.
Note
When reinstalling or upgrading the Maintenance Console, it is possible to create a backup of all profiles.
This allows you to use the original connection settings with the new Maintenance Console.
The functions of the buttons on this screen are as follows:
Button Function
Profile File Opens or saves profiles as separate files.
Save current Overwrites the previous settings with the current settings when a profile already exists.
profile A confirmation message will be displayed.
Save as new Saves the current settings as a new profile. A Profile Name is required.
profile
Document Version 2009-12
Values
1-9, 0, *, #, -,
"," [comma], T, P, W
Auto(Tone),
Auto(Pulse), Manual
Max. 40 characters
COMx
1200, 2400, 4800, 9600,
19200, 38400
–
2.2.7 Program launcher—Connect—Profile Setup
Description
Enter the telephone number to be dialed to
access the PBX.
T: Converts the Dial Type from Pulse to
Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done
with a connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port
assigned to the PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialize command, and
click Initialize to send the command to the
modem.
For more details, refer to your modem's
instruction manual.
PC Programming Manual 33