Panasonic KX-NCP500 Pc Programming Manual page 434

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

4.18 [2-9] System Options
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
13.1.18 Private Network Features—Network ICD Group
9.1.4 ICD Group Features—Outside Destinations
Private Network—Public Call through Private Network—Minimum Public Caller
ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered as a call
from a public network.
Default
9
Value Range
0–15
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.3 Caller ID
Private Network—TIE Call by Extension Numbering (Activation Key Required)
Enables extensions at two PBXs connected in a network (not including a VoIP network) to have the same
leading number. For example, extension 101 is registered at PBX 1, and extension 102 is registered at PBX
2. Only the Extension Number Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
434
PC Programming Manual
Document Version 2009-12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-ncp1000

Table of Contents