Program Launcher; Program Launcher-New; Program Launcher-Open; Program Launcher-Connect-Rs-232C - Panasonic KX-NCP500 Pc Programming Manual

2.2.3 Program launcher—Connect—RS-232C

2.2 Program launcher

2.2.1 Program launcher—New
Creates a new system data file, used to program the PBX in Batch mode. All settings are in their initial or default
state.
This option is only available at Installer level.
To upload the file created here to the SD memory card installed in the PBX, see 2.6.2 Utility—File Transfer
PC to PBX (SD Card).
Note
Since selecting this option creates a blank system data file, uploading this file to the PBX will overwrite all
previous settings. Use only when necessary.
To create a new system data file
1.
From the program launcher, select New.
2.
Click the appropriate model number.
3.
Click OK.
2.2.2 Program launcher—Open
Opens a system data file previously saved on the PC, and enters Batch mode.
When opening a file created with an older version of the Maintenance Console, you will be asked whether you
want to convert the data for use with the current version or not. Using the data without converting may result
in some data being loaded to an incorrect destination, and is not recommended.
If the file is not supported by the PBX (e.g. a system data file from an incompatible PBX), it will not be opened.
The only files that can be opened are files that were created by the Maintenance Console for a supported PBX.
To upload a file opened here to the SD memory card installed in the PBX, see 2.6.2 Utility—File Transfer
PC to PBX (SD Card).
To open a system data file
1.
From the program launcher, select Open.
The Open dialog box will be displayed.
2.
Navigate to the folder containing the system data file you want to open.
3.
Select the file.
4.
Click Open.
If the file was created with an older version of the Maintenance Console, you will be asked if you want to
convert the data.
•
Click Yes to convert the data for use with the current version of the Maintenance Console. Enter a
name for the new converted system file.
•
Click No to open the file as it is.
2.2.3 Program launcher—Connect—RS-232C
Connects to the PBX in Interactive mode through the serial RS-232C interface of the PBX.
This option allows direct entry of connection parameters, for cases where the PC is used to connect to one or
just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to multiple PBXs and
30 PC Programming Manual Document Version 2009-12