Panasonic KX-NCP500 Pc Programming Manual page 272

3.31 [1-1] Slot—Port Property - PRI Port
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
None
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
Specifies whether each ISDN or QSIG supplementary service is used.
The available services depend on the setting of
When using the Centralized VM feature, set CF (Rerouting) to "No".
Default
CLIR, E911: Yes
Other services: No
Value Range
No, Yes
Maintenance Console Location
3.31 [1-1] Slot—Port Property - PRI Port
Programming Manual References
None
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
13.1.21 Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
13.1.22 Private Network Features—QSIG—CF (Call Forwarding)
13.1.23 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation)
and CNIP/CONP (Calling/Connected Name Identification Presentation)
13.1.24 Private Network Features—QSIG—CT (Call Transfer)
272 PC Programming Manual
Port Type on this screen.
Document Version 2009-12