3.
Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE:
If the WWAN antenna cables are not connected to the terminals on the WWAN module, protective
sleeves should be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
WLAN module
Description
Intel 802.11 a/b/g/n 2x2 Combo Adapter
Intel 802.11 b/g/n HMC 1x1
Atheros 802.11 b/g/n 1x1
Intel 802.11 2x2 a/b/g/n
Intel 802.11 2x2 a/b/g/n
Intel 802.11 a/b/g/n 2x2 + Bluetooth 4.0 WLAN
Spare part number
670292-001
675794-001
690019-001
695915-001
710661-001
717381-001
Component replacement procedures
75