Service Cover - HP ProBook 640 G1 Maintenance And Service Manual

Service cover

Description
Service cover for use on computer models equipped with a 15.6-inch display assembly
Service cover for use on computer models equipped with a 15.6-inch display assembly and which meet
regional configure to order (RCTO) specifications
Service cover for use on computer models equipped with a 14-inch display assembly
Service cover for use on computer models equipped with a 14-inch display assembly and which meet
regional configure to order (RCTO) specifications
Remove the service cover to access the memory module slot, hard drive, and other components.
1. Remove the battery (see
2. With the battery bay toward you, slide the service cover release latch (1) to the left, remove the screw
(if the optional screw is being used) (2), and then slide the release latch again (3) to release the service
cover.
NOTE:
3. Slide the service cover toward the front of the computer (4) and lift (5) to remove the service cover.
Reverse this procedure to install the service cover.
Battery on page
If you not want to use the optional screw, you can store it inside the service cover.
64).
Component replacement procedures
Spare part number
738693-001
748358-001
738682-001
748357-001
65