Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures - HP ProBook 640 G1 Maintenance And Service Manual
This document is intended for hp authorized service providers only.
Hide thumbs
Also See for ProBook 640 G1:
- Overview (61 pages) ,
- Maintenance and service manual (170 pages)
Table of Contents
Advertisement
5
Removal and replacement procedures for
Customer Self-Repair parts
NOTE:
The Customer Self-Repair program is not available in all locations. Installing a part not supported by
the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.
Component replacement procedures
NOTE:
Please read and follow the procedures described here to access and replace Customer Self-Repair
parts successfully.
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer. See Service tag on page 16 for details.
This chapter provides removal and replacement procedures for Customer Self-Repair parts.
There are as many as 16 screws that must be removed, replaced, and/or loosened when servicing Customer
Self-Repair parts. Make special note of each screw size and location during removal and replacement.
Component replacement procedures
63
Advertisement
Table of Contents
