Kyocera FS-9120DN Service Manual page 62

Maintenance
item No.
U398 Adjusting left margin of image printing for each paper cassette
Description
Adjusts the left margin of image printing for each paper cassette.
Purpose
To adjust the left margin if it is displaced depending on the paper cassette. Before adjusting this item, use U402
to adjust the left margin of the upper cassette of the printer.
Method
1. Enter the maintenance mode and press the
>Set Paper Feed>
[U398] Regist
2. Press the
3. Press the
Display
Cassette 2
Cassette 3
Cassette 4
Duplex
4. Press the ENTER key. "_" will blink.
>>Cassette 2
[398.1]
5. Press the
key to change the preset value.
If the preset value is increased, the margin will be larger. If the preset value is decreased, the margin will be
smaller.
6. Press the ENTER key. The value is set.
To keep the preset value, press the CANCEL key.
U399 Setting FRPO
Description
Set the firmware again.
Purpose
To change the preset values of firmware.
Method
1. Enter the maintenance mode and press the
>Set FRPO
[U399] Parameter
2. Press the
3. Press the
4. Press the ENTER key. "_" will blink.
>>FRPO H0
[399.1]
5. Press the
key to change the preset value.
6. Press the ENTER key. The value is set.
To keep the preset value, press the CANCEL key.
key to display the submenu screen.
or key to select the item for which the preset value is to be changed.
Description
Left margin for lower cassette of the printer
Left margin for upper cassette of PF-70
Left margin for lower cassette of PF-70
Left margin for duplex printing
###
or key to move "_" to the digit position at which the value is to be changed and press the
>
key to display the submenu screen.
or key to select the item for which the preset value is to be changed.
##
or key to move "_" to the digit position at which the value is to be changed and press the
Description
or key to display "U398".
Setting range
-600 to +600
-600 to +600
-600 to +600
-600 to +600
or key to display "U399".
FS-9120DN/9520DN
Initial setting
0
0
0
0
or
or
1-4-29