Kyocera FS-9120DN Service Manual page 141

1-7-1 Downloading printer firmware for upgrade
The system (program) and engine firmware that are stored in a system DIMM PWB and a flash ROM on the engine
controller PWB are upgradable by downloading new firmware into these devices. Downloading can be made either by
directly sending the new firmware from PC via the parallel interface or using a memory card that contains the new
firmware.
The message data for the operator panel display is also downloadable so that a new message language is appended for
the operator panel. The message data should be downloaded directly from PC.
(1) Format for the firmware files
The file name for the firmware files is coded so that it implies the type, applicable product, and the version of the file.
Refer to the example below:
System firmware file name example
B10K15000.bcmp
Engine firmware file name example
EB10K0012.x
Operator panel message data file name example
dm6602.dan
Version code: Version 150.00
ID code for Kyocera
Machine code: FS-9120DN (B19)
FS-9520DN (B10)
Version code: Version 0012
ID code for Kyocera
Machine code: FS-9120DN (B19)
FS-9520DN (B10)
ID code for engine firmware
Language code
Version code: Version 02
Message code: FS-9120DN (B19)
FS-9520DN (B10)
ID code for operator panel massage data
compression
Boot program is included.
Void
dan: Danish
swe: Swedish
rus:
pol:
cze: Czech
hun: Hungarian
Table 1-7-1
FS-9120DN/9520DN
Russian
Polish
1-7-1