Kyocera FS-9120DN Service Manual page 27

FS-9120DN/9520DN
Connecting the power cord.
1. Plug the power cord into the power cord
connector on the rear of the printer. (220 - 240 V
models only)
2. Connect the other end of the power cord into a
power outlet.
Printing a status page for test.
1. Add paper in the paper cassette.
2. Turn on the printer power switch.
"Adding toner" will be displayed and the toner
supply action will be taken for about 8 minutes.
3. Press the MENU key on the operation panel.
4. Press the or
Status page] is displayed.
5. Press the ENTER key twice. A status page is
printed.
Completion of the machine installation.
1-3-8
key repeatedly until [Print
Power cord connector
(220 - 240 V models only)
Figure 1-3-17
Power cord