Tspec Status And Statistics - Linksys LAPAC1750PRO User Manual

LAPAC1750PRO Access Point Software User Manual
From Station The number of packets and bytes received from the
wireless client, and the number of packets and bytes
that were dropped after being received Also, the
number of packets:
• in excess of an admitted TSPEC
• for which no TSPEC has been established when
admission is required by the AP
To Station The number of packets and bytes transmitted from
the AP to the client, and the number of packets and
bytes that were dropped upon transmission Also, the
number of packets:
• in excess of an admitted TSPEC
• for which no TSPEC has been established when
admission is required by the AP

TSPEC Status and Statistics

The TSPEC Status and Statistics page provides:
• Summary information about TSPEC sessions by radio
•
Summary information about TSPEC sessions by VAP
• Real-time transmit and receive statistics for the TSPEC VAPs on all radio
interfaces
All transmit and receive statistics shown are totals since the AP was last started
If you reboot the AP, these figures indicate transmit and receive totals since the
reboot
To view TSPEC status and statistics, click the System Status > TSPEC Status
and Statistics tab The following image has been edited to show some of the
transmit and receive statistics
Section 2: Viewing Access Point System Status
Figure 9: TSPEC Status and Statistics
16