Local Groups - Linksys LAPAC1750PRO User Manual

LAPAC1750PRO Access Point Software User Manual
Table 60: Captive Portal Upload Custom Images
Field Description
Upload Web
To select an image to upload to the AP for use
Customization in the CP authentication page, click Browse and
Image browse to the image to upload After you select the
appropriate image, click Upload
Delete Web To remove an image that has been uploaded, select
Customization the name of the image from the available menu
Image and click Delete
Section 3: Configuring the Access Point

Local Groups

Each local user is assigned to a user group Each group is assigned to a CP
instance The group facilitates managing the assignment of users to CP
instances
The user group named Default is built-in and cannot be deleted You can
create up to two additional user groups The fields available on the page
depend on the option selected from the Captive Portal Groups menu
Click the Configuration > Captive Portal > Local Groups tab to access the page,
which the following figure shows
Figure 54: CP Local Groups
The following table describes the fields on the CP Local Groups page that you
use to create a CP local group
Table 61: Captive Portal Local Group Configuration
Field Description
Captive Portal The menu includes all CP groups that exist on the
Groups switch To create a new group, select Create To delete a
CP group, select the group name
Group Name This field is available only if the option selected from
the Captive Portal Group menu is Create Specify a
name for the local user
Delete Group This field is available only if the option selected from
the Captive Portal Group menu is a user-created CP
group To delete the selected group, select the check
box and click Save
97