Management Access - Linksys LAPAC1750PRO User Manual

LAPAC1750PRO Access Point Software User Manual
NOTE:
After you configure the Email Alert settings, you must click Save to apply
the changes and save the changes to startup configuration file
NOTE:
Hostnames are composed of a series of labels joined with dots, as are
all domain names Each label must be between 1 and 63 characters
long, and the entire hostname (including dots) has a maximum of 253
characters
To validate the configured email server credentials, click Test Mail You can send
a test email once the email server details are configured
The following text shows an example of an email alert sent from the AP to the
network administrator:
From: AP-192 168 2 10@mailserver com
Sent: Wednesday, February 08, 2012 11:16 AM
To: administrator@mailserver com
Subject: log message from AP
TIME Priority Process Id
Feb 8 03:48:25 info login[1457]
Feb 8 03:48:26 info mini_http-ssl[1175]
Message
root login on 'ttyp0'
Max concurrent
connections of 20
reached
Section 3: Configuring the Access Point

Management Access

You can create an access control list (ACL) that lists up to five IPv4 hosts and
five IPv6 hosts that are authorized to access the AP management interface If
this feature is disabled, anyone can access the management interface from any
network client by supplying the correct AP user name and password
Figure 18: Management Access
Table 20: Management Access
Field Description
Management Enable or disable the management ACL feature At least
ACL Mode one IPv4 or IPv6 address should be configured before
enabling Management ACL Mode If enabled, only the IP
addresses you specify will have Web and SNMP access to
the management interface
IP Address Enter up to five IPv4 addresses that are allowed
management access to the AP Use dotted-decimal format
(1–5)
(for example, 192 168 10 10)
IPv6 Address
Enter up to five IPv6 addresses that are allowed
management access to the AP Use the standard IPv6
(1–5)
address format (for example, 2001:0db8:1234::abcd)
NOTE:
After you configure the settings, click Save to apply the changes and to
save the settings
25