Wireless-G Access Point with Power Over Ethernet
5. Connect the power adapter to the Access Point and an electrical outlet. (If you are using Power Over Ethernet,
(POE), then you can skip this step.) Click the Next button to continue or Back to return to the previous screen.
6. Make sure the Access Point's Power and Wireless Link LEDs are lit. If they are not, check your cable
connections. Click the Next button to continue Click the Next button to continue or Back to return to the
previous screen. You can also click Exit to exit the Setup Wizard.
Chapter 5: Setting Up the Wireless-G Access Point with Power Over Ethernet
Setup Wizard
Figure 5-4: Power on the Access Point
Figure 5-5: Check the Access Point's Status
12