Dimplex FWS 27 Operating Instructions Manual page 14

FWS 27
FWS Solartronic
Individual parameter as follows:
Language
Operating language can be selected.
Setting options:
>1<
>0<
Tone
Activation and Deactivation of key
tones.
Setting options:
>on<
>--<
Background light
Activation and Deactivation of display
background.
Setting options:
>on<
>At<
>--<
Controller offset
At this point the temperature offset can
be adjusted. In accordance to the
stipulated value of the direct water unit
(e.g. 50°C) the offset of the fresh water
unit can be exchanged from 0K until +/
-10K. (e.g. 50°C+ 5K=55°C index value
for the fresh water unit.
Note:
In the service-menu „FRIWA-index
value" the set temperature is directly
indicated.
Charges per kWh (ct)
The relevant electricity tariff can be
entered.
Setting opions:
from 0 ct to 199,90 €
Aux display
Activation of additional parameters.
Setting opions:
>t1 <
>Po<
>FL<
>--<
Note:
When additional parameters are
activated the time cannot be displayed
at the same time.
Clock
Time settings can be done.
Setting options:
>h<
>min< minutes
>s<
The service-key
parameters to be changes („h", „min" or
„s").
The arrow keys
the set value shown.
Press the setup-key
new value.
German
English
Key tone activated
Key tone deactivated
background light constantly on
background light switches on
automatically e.g. when key
are pressed and switches off
automaticcally after some
times.
background light off
inlet temperature (°C)
power (kW)
flow rate (l/min)
no additional display
hours
secondes
selects the clock
and changes
sstores the
14
With service key you will get back
to the standard display.
Note:
The arrow key reset the display to
zero when mode „s" is closen.
The arrow key deactivated the
display of the clock..
Load decrease
Setting of load shedding parameters.
Setting options:
>0< standard operation, factory
setting
>1< operation with standard load
shedding relay
>2< operation with sensitive load
shedding relay
Lock level
Limitation of appliance's operation
complexity. The limitation can per-
formed by a professional only.
Setting options:
>0< no restriction (factory setting),
>1< factory reset via key (count-
down) not possible, para-
meters can be seen but not be
modified in setup menu.
>2< same as"1", additionally the
setup menu cannot be open.
>3>< same as"2",additionally nomi-
nal value memory /handwash,
shower, bathtub, kitchen) not
changeable.
>4< same as"3", additionally nomi-
nal value not changeable
Flow limit
Setting of flow rate limitation.
Setting options:
>--< no flow rate limitation
>At< automatic adjustment, i.e. flow
rate is limeted in a way so that
the selected outlet tempera-
ture is reached.
>Eco< flow rate limitation to max.
8,0 l/min
i.e.8.0 limitation to a selected value
Note:
„Eco" is displayed when operating
mode „Eco" is selected and the set
temperature is below 43°C.