Ucnet; Wired Settings Menu - PRESONUS StudioLive CS18AI Owner's Manual

3 Controlling StudioLive RM-series Mixers
3.7

UCNET

UCNET
3.7

Wired Settings Menu

3.7.1
UCNET stands for Universal Control Network. This is the communications system
that allows all StudioLive systems and peripherals to stay in sync and work together.
The top banner of this screen will display the IP address of the currently
network by type: Wired or Wireless. Pressing the Settings icon to the right
of the of either, will open the corresponding network settings option.
In the main section of the screen, you will find two sections.
In the Mixer Control section, you will find the connected RM-
series mixer. Tapping on the pull-down menu will open a list
of every available RM-series mixer on the network
In the Software Control section, you will find the connected instance
of Studio One. Tapping on the pull-down menu will open a list of
every available instance of Studio One on the network.
Once your CS18AI is connected to a wired LAN network, you'll see the current IP
address of your CS18AI. This IP address can be assigned in one of three ways. Select
the necessary IP assignment mode by touching one of the following buttons:
• Dynamic. The IP address is assigned automatically upon connection to the
network, and can shift to a new address when necessary due to changes
in network availability. In this mode, a Renew Lease button is shown
onscreen. Touch this button to renew the DHCP lease for your CS18AI.
• Static Self-Assigned. The IP address is assigned automatically,
but stays the same thereafter until you need to change it. In
this mode, an Apply button is shown. Touch this button to
auto-assign a new static IP address to your StudioLive.
• Static Manual. The IP address can be set manually, and remains the same until it
is changed. In this mode, an Edit button is shown. Touch this button to open the
Static Manual Edit screen, where you can specify IP address, subnet mask, and
gateway settings for your StudioLive as needed for your network configuration.
Touch each field in the form to bring up an onscreen keyboard for entry. When
you're finished entering the settings, press Apply to establish the new settings.
To exit without re-setting IP settings, switch to another IP assignment mode.
StudioLive CS18AI
™
Owner's Manual
58