Wireless Networking - PRESONUS StudioLive CS18AI Owner's Manual

2 Getting Started
2.3 Step 3: Network Your CS18AI
2.3.3

Wireless Networking

9. On the touchscreen of your CS18AI, you will see your
computer's IP address and description.
10. Touch to select.
11. On the CS18AI, press the DAW button.
Your CS18AI is now ready to control Studio One!
Power User Tip: After you have launched Studio One and successfully connected
your CS18AI, you can re-enable WiFi on your computer. However, because WiFi
must be disabled for Studio One to pair to your CS18AI initially, it is recommended
that you use a router if you want to use WiFi functionality on your computer.
Your CS18AI can be connected to a standard LAN network wirelessly,
using the PreSonus WF-150 USB Wi-Fi LAN adapter and a standard
wireless router. A wireless connection can only carry control data, which
is useful for controlling Studio One software or any application where
the CS18AI's onboard audio inputs and outputs are not needed.
Note: The StudioLive CS18AI does not support hot-swapping the Wi-Fi LAN
adapter. The LAN adapter must be connected when you power up your
CS18AI. Once you make the connection, the CS18AI will automatically
see the RM-series mixer and will show it in the UCNET page.
StudioLive CS18AI
™
Owner's Manual
15