Rear - PRESONUS StudioLive CS18AI Owner's Manual

2 Getting Started
2.2 Step 2: Update CS18AI Firmware
10. Select and copy/paste or drag the five firmware files to the root directory of
your thumb drive. If the files are inside a folder, the update will not execute
correctly. Eject the flash drive and disconnect it from your computer.
11. Insert the thumb drive into the USB slot on the rear of your
CS18AI controller. Make sure your CS18AI is powered off.
12. Press and hold the Home button while you power on your CS18AI.
13. Continue to hold the Home button until only the Channel 1 Meter is
illuminated. This is your indication that the firmware update has begun.
14. The Meters will continue to illuminate updating the progress of the
firmware update. When all 22 meters are fully lit, the update is complete.
Note: This process can take up to 10 minutes. Do not power
off your CS18AI until all 22 meters are illuminated.
StudioLive CS18AI
™
Owner's Manual
9