PRESONUS StudioLive CS18AI Owner's Manual page 18

2 Getting Started
2.3 Step 3: Network Your CS18AI
2. Press the UCNET button on the CS18AI.
3. On the CS18AI touchscreen, press the Settings button in the Wired IP column.
4. On the CS18AI touchscreen, select the "Static Self-Assigned" tab.
5. Press the "Apply" button.
6. When the IP address is displayed below Wired IP, close the Settings menu.
7. Disable WiFi on your computer (if applicable) and make sure your computer
has a self-assigned IP address. If you are unsure of how to verify this,
please check your operating system's networking documentation.
8. Launch Studio One.
StudioLive CS18AI
™
Owner's Manual
14