PRESONUS StudioLive CS18AI Owner's Manual page 59

3 Controlling StudioLive RM-series Mixers
3.6 Home Screen
3.6.1.2 Aux and FX Routing Menus
The Aux and FX Routing menus let you configure the pre/post
routing options for all your aux and FX mixes at once.
Pre 1: Sends each channel to the Aux bus after the polarity invert,
highpass filter, and gate. This is the default state for all aux mixes.
Pre 2: Sends each channel to the aux bus after all Fat Channel processing (polarity
invert, highpass filter, gate, compressor, EQ, and limiter) but before the fader.
Power User Tip: Use the Pre 2 position for headphone and in-ear mixes
to give your performers a polished "studio" sound. This setting should be
avoided for floor wedges, as compression can cause feedback problems.
Post: Sends each channel to the Aux bus after all Fat Channel processing
(polarity invert, highpass filter, gate, compressor, EQ, and limiter)
and after the fader. This is the default state for all FX mixes.
StudioLive CS18AI
™
Owner's Manual
55