Direct Connection To Studio One - PRESONUS StudioLive CS18AI Owner's Manual

2 Getting Started
2.3 Step 3: Network Your CS18AI
2.3.2

Direct Connection to Studio One

5. Press the "Apply" button.
6. When the IP address is displayed below Wired IP, close the Settings menu.
7. Select your RM-series mixer from the drop-down menu in the Mixer control field.
8. The power LED on the RM-series mixer will turn blue once
its connected and communicating to the CS18AI.
To directly connect your CS18AI to your computer, you will need to use a
crossover Ethernet cable, or to connect both your computer and your CS18AI
to a standard Ethernet switch. This section will describe the latter. This setup
is only recommended if you do not require Internet or extended network
access for your computer to access printers and other network devices.
1. Connect both your CS18AI and your computer to
an Ethernet switch. Power both on.
Ethernet Switch
StudioLive CS18AI
™
Owner's Manual
13