PRESONUS StudioLive CS18AI Owner's Manual page 29

3 Controlling StudioLive RM-series Mixers
3.1 Layers, Filter DCAs, and Mixes
3.1.2.2 Editing a Filter DCA Group
When a group is selected two things will happen:
• The channel strips will filter out all channels not in the group, only
displaying the channels in the group. For example, if you have channels
1, 18, and 30 in group A, when that group is selected you'll see those
channels displayed on channel strips 1 through 3 of the CS18AI.
• The Flex Master fader will become the main group control for the selected
group. Moving the Flex Master fader will move all the faders for all
channels in the group, relative to one another, so that the mix balance is
maintained. Muting the Flex fader will mute all channels in the group.
1. Press the Groups button in the Master Control area of
the front panel to open the Groups screen.
2. Touch the name of the group you'd like to edit. This
will simultaneously select the group.
3. Touch the onscreen Edit button to open the Group Edit page. From here you can
add and remove channels in the group, rename the group, or delete the group.
StudioLive CS18AI
™
Owner's Manual
25