Signing The Remote Control On/Off - Miele DA 3660 Operating And Installation Instructions

Signing the remote control on/off

If the connection has been lost between
the remote control and the ventilation
hood, the remote control and the
remote control function on the
ventilation hood must be signed on
again. To do this, the remote control
function on the ventilation hood and the
remote control must first be signed off.
Signing on/off is carried out with the
canopy retracted.
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
50
Signing on and off must be done at the
same time on the ventilation hood and
the remote control. Signing on/off mode
has to be accessed on the ventilation
hood first, then on the remote control.
Accessing signing on/off mode on
the ventilation hood
 Press the delayed shut down button
515 for approx. 10 seconds until
the 1 indicator appears in the fan
level display.
 Then, press the following buttons in
order:
– The  button
– Followed by the  button
– And then the lighting button .
 Then access the signing on/off mode
on the remote control immediately.
Accessing signing on/off mode on
the remote control
 Press both arrow controls  at the
same time and hold for about 5
seconds until the remote control LED
flashes.
 Press the lighting control .
Signing off
 In signing on/off mode press the ""
control on the ventilation hood and
then on the remote control.
The remote control LED flashes
steadily.
After approx. 10 seconds the remote
control LED will flash on and off twice
with a longer interval between the