Miele DA 3660 Operating And Installation Instructions page 51

flashes. The remote control has now
been signed off. The LED will go out
after a short while.
 Confirm the signing off procedure by
pressing the delayed shut down
function control 515 on the
ventilation hood. All indicators will go
out.
Please bear in mind that disabling the
signal will also disable any
Con@ctivity 2.0 function and this will
have to be activated again.
Starting the signing on procedure
 In signing on/off mode press the ""
control on the ventilation hood first
and then on the remote control.
The search for a signal will commence.
The remote control LED will flash
steadily.
After approx. 30 seconds the remote
control LED will flash on and off 4 times
at short intervals. The connection has
been established. The LED will go out
after a short while.
 Confirm signing on with the
ventilation hood delayed shut down
function control 515. All indicator
lights will go out.
The remote control can now be used.
If you do not confirm within 4 minutes,
activation will be canceled.
Canceling the signing on procedure
 If it is not possible to sign on, the
procedure can be canceled by
pressing the delayed shut down
Signing the remote control on/off
option control 515 on the
ventilation hood and on the remote
control.
 The signing on procedure must then
be repeated. To do this, the
ventilation hood and the remote
control must first be signed off.
51