Table of Contents
Advertisement
Operation (Manual mode)
Turning power management On/Off
You can deactivate the power
management.
This can result in increased electricity
consumption.
Switch off the ventilation hood. The
canopy must be retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Press and hold the delayed shut
down button 5 15 for approx. 10
seconds until 1 appears in the fan
level display.
Then, press the following buttons in
order:
– The lighting button ,
– Followed by the "" button and then
– The lighting button again.
If power management is turned on, the
1 and IS indicators will be continuously
lit.
If it is turned off, 1 and IS will flash.
Press the "" button to turn power
management off.
The 1 and IS indicators will flash.
To turn it on, press the "" button.
The 1 and IS indicators are constantly
lit.
24
Confirm the setting by pressing the
delayed shut down button 5 15.
All the indicator lights will go out.
If the new setting is not confirmed
within 4 minutes, the hood reverts to
the previous setting.
Advertisement
Table of Contents
