Table of Contents
Advertisement
a 2 covers for the brackets.
b 2 brackets to support the appliance
in the wall unit.
c 1 cover for the charcoal filter slots.
d 1 spacer strip to conceal the gap
between the rear of the appliance
and the wall.
e Conversion kit for recirculation
mode (the conversion kit is not
supplied. It must be ordered
separately as an optional accessory
- see "Technical data"). The kit
contains an exhaust grille and
flexible aluminum hose with hose
clips.
12 screws 4 x 15 mm (9/16") for
securing the ventilation hood to the
wall unit.
4 screws M4 x 16 mm (5/8") for
securing the ventilation hood to the
brackets and for securing the spacer
strip.
4 screws M4 x 8 mm (5/16") for
securing the spacer strip.
4 screws 4 x 25 mm (1") for securing
a 900 mm (35 7/16") wide ventilation
hood.
4 adhesive covers to conceal the
fixing holes which are not required.
1 x T 20 angled key
Installation instructions
Installation
37
Advertisement
Table of Contents
