Table of Contents
Advertisement
Repositioning the ducting
The blower can be rotated to allow the
ducting to be fitted at the back of the
hood. This may be necessary if the
hood is being fitted in a reduced height
wall unit, for example. Repositioning is
carried out before installing the hood.
The ventilation hood must be
disconnected from the power supply.
Undo the fixing screws on the front
panel of the ventilation hood housing
and remove the panel.
Undo the screws from the cover on
the back of the ventilation hood
housing and remove the cover.
Unscrew the fixing screws on the
motor unit.
Turn the fan towards the rear and
position the exhaust socket in the
cut-out in the back panel of the
ventilation hood housing. Ensure
when turning the fan that the power
cord does not become detached.
Secure the fan in its new position.
Now secure the cover taken from the
back panel to the top of the housing.
Refit the front panel and secure it
using the screws.
Installation
43
Advertisement
Table of Contents
