Table of Contents
Advertisement
Disconnect the connection to the
cooker hood (see "Signing out of
WiFi") and to the hob.
Repeat the process.
With a direct WiFi connection, it is not
possible to connect the hob and the
cooker hood to a home network. This
means that, for example, the appliance
then cannot be operated via the Miele
app. Should a connection to the home
network be required at a later date, the
direct WiFi connection between the
hob and the cooker hood must be
disconnected first (see "Signing out of
WiFi").
Signing on the remote control
Miele DARC 7 is an optional accessory
Hold down the B control on the
cooker hood and then press and hold
the 2 control for approx. 2 seconds at
the same time.
2 will light up constantly, 3 will flash.
Start the sign-on process on the
remote control. For further details,
see the remote control operating
instructions.
When successfully signed on, 2 and 3
will light up constantly.
Confirm your choice with the On/Off
switch .
If the sign-on process was not
successful, 2 and 3 will flash.
In this case, repeat the process.
Signing off the remote control
Hold down the B control on the
cooker hood and then press and hold
the 3 control for approx. 2 seconds at
the same time.
If a remote control is signed on, 2 and 3
will light up constantly.
Touch 1.
2 will light up constantly, 3 will flash.
After a few seconds, 2 and 3 will start
flashing on and off. The remote control
is signed off.
Confirm your choice with the On/Off
switch .
Commissioning
21
Advertisement
Table of Contents
