Table of Contents
Advertisement
Recharge the Battery From a Computer USB Port
To recharge the battery from the USB port on your computer:
1.
Attach one end of the micro USB cable to the mobile router and plug the other end into
the USB port on your computer.
The Battery icon includes a lightning bolt to indicate that the battery is charging.
The Battery icon on the LCD indicates when the battery is fully charged and a notification
displays.
Note:
The LCD goes into sleep mode after a set time to extend battery life.
To wake up the LCD, press and quickly release the Power button.
Use the USB Type C Cable to Charge Only
You can log in to the mobile router and specify a setting so that the USB type C cable is used
only for charging and not to access the mobile router using a web browser. You might want to
do this if you are using the Ethernet port and a wall socket is not available to charge the
mobile router.
To specify a USB type C cable charge-only setting:
1.
From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The mobile router dashboard displays.
4.
Select Setup > Router Setup.
The Router Setup page displays.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Manage Battery Usage and Charging
23
Advertisement
Table of Contents
