Table of Contents
Advertisement
•
If the Telstra network signal is low, consider using external antennas or cradle the mobile
router with built-in high-gain antennas.
What do I do if I forget my admin login password?
The default admin login password is admin, and the mobile router web page URL is
http://m.home or http://192.168.1.1.
If you changed the admin login password and can't remember the password that you created,
you must set the mobile router back to factory defaults. For information about how to reset to
factory default settings, see
How do I disconnect from the mobile broadband network?
To disconnect from the network from the mobile router web page:
1.
From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3.
Enter the mobile router password.
The password is case-sensitive.
The dashboard displays.
4.
Select Settings > Advanced Settings > Cellular.
The Network Settings page displays.
5.
Clear the Data check box.
6.
Click the Apply button.
Your settings are saved.
The LCD is not lit. How do I know if the mobile router
is still powered on?
The LCD dims to save energy. The LED continues to blink slowly to indicate that the mobile
router is still powered on. To wake the LCD, press and quickly release the Power button.
How do I find my computer's IP address?
The steps for finding your computer's IP address depend on the operating system. If your
device runs an operating system not listed here, see the appropriate operating system
documentation.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Factory Reset
on page 68.
Frequently Asked Questions
75
Advertisement
Table of Contents
